Parts List
Overview
10.1 Overview
Introduction
This section provides the replacement parts lists for the DR4500A Clasic Series Recorder. Most parts are
supplied on an optimum replacement unit basis; that is, part numbers are given for complete printed circuit
boards rather than for individual PCB components.
The figures that follow are exploded views of the DR4500A recorder. Each part is labeled with a key
number and the key numbers are listed in tables with associated part number.
Also included for your reference are an Internal Cabling drawing (Figure 10-5) and an Internal Wiring
Diagram (Figure 10-6) for options only.
When ordering parts, be sure to specify your recorder's serial and model numbers (on nameplate) as well as
the part identification.
What's in this section?
This section contains the following topics:
10.1
Overview
10.2
Exploded Views
10.3
Miscellaneous Hardware Kit Contents
10.4
Figure 10-5
10.5
Figure 10-6
222
DR4500A Classic Series Circular Chart Recorder With or Without Control Product Manual
10. Parts List
Topic
Figure 10-1 Door assembly
Figure 10-2 Chart plate assembly
Figure 10-3 Basic recorder components without options
Figure 10-4 Recorder components associated with options
Internal Cabling Data
Internal Wiring Diagram – Options Only
See Page
222
223
223
224
226
228
230
232
233
Release L
February 2017