Table 5-9 Alarm And Tuning Messages - Honeywell DR4500A Product Manual

Alarm and tuning messages
Alarms #3 through #6 and Accutune II for Control Loops #1 and #2 are indicated in the lower display.
In the case of more than one simultaneous diagnostic or alarm message, each message will be shown in
succession.
Prompt
ALARM 3
ALARM 4
ALARM 5
ALARM 6
TUNING 1
TUNING 2
ATTENTION
An active alarm will always provide an indication on the display but may not control its
associated relay; that is, a higher priority function such as a control loop or timer may have
control of the relay.
Release M DR4500A Classic Series Circular Chart Recorder With or Without Control Product Manual
April 2017

Table 5-9 Alarm and tuning messages

Indicates an alarm 3 action.
Indicates an alarm 4 action.
Indicates an alarm 5 action.
Indicates an alarm 6 action.
Indicates Accutune II in progress for Control Loop 1.
Indicates Accutune II in progress for Control Loop 2.
Operation - Monitoring Your Recorder
Description
127