Mode Switching With 1-Button Models - 2N Helios IP Vario Installation Manual

5, 4, 4, 5, 5, 6 for 6-buttons modely
The acoustic signal
Wait until the device is restarted automatically.
Note
The 2, 1, 1, 2, 2, 3 sequence must be entered within 30 seconds after the
first sound signal for security reasons. The inter-digit delay may be 2 s at
most.
®
2N Helios IP Vario
configured properly.

Mode Switching with 1-Button Models

®
Connect 2N Helios IP Vario
already connected).In case your
you can switch the modes using one button only.
Wait for the first acoustic signal
Press the quick dial button 15 times.
The acoustic signal
Wait until the device is restarted automatically.
2N TELEKOMUNIKACE a.s., www.2n.cz
indicates mode switching.
gets the IP address upon restart only if the DHCP server is
to the power supply (or, disconnect and reconnect it if
®
2N Helios IP Vario
indicates mode switching.
device is equipped with 1 button,
.
75/97