Incoming Call Answer And Reject; Code Door Opening (Switch Activation); User Activation And Deactivation - 2N Helios IP Vario Installation Manual

Procedure:
Push .
1.
You can hear the continuous tone from the loudspeaker.
2.
Enter the telephone number using the numeric keypad and push
3.
confirmation.
You can also hang up the call any time by pushing
4.
is enabled; refer to the Intercom Configuration / Hardware / Keyboard
subsection of Configuration Manual.

Incoming Call Answer and Reject

If the automatic incoming call answer is disabled (refer to the Intercom Configuration
/ Services / Phone / Calls subsection of Configuration Manual), a call coming to 2N®
Helios IP Vario is signalled with loud ringing. Push
call.

Code Door Opening (Switch Activation)

®
2N Helios IP Vario
enter the valid code (refer to the Intercom Configuration / Hardware / Switches
subsection of Configuration Manual) on the numeric keypad.
Procedure:
Enter the lock 1 or lock 2 activating code using the numeric keypad and push
.
A valid code is signalled by a continuous switch activation (lock opening)
signalling tone. An invalid code is announced by acoustic signalling

User Activation and Deactivation

You can activate or deactivate a user and define call routing to the user telephone
numbers using the numeric keypad. For more details refer to the Intercom
Configuration / Directory / Phone Book Telephone Directory subsection.of of
Configuration Manual.
Procedure:
Enter the user activation or deactivation code using the numeric keypad and
push for confirmation.
2N TELEKOMUNIKACE a.s., www.2n.cz
is equipped with a door unlocking switch. To activate the switch
if the Hang-up by #
to answer and to reject the
again for
button
.
78/97