Chapter 6: Engineering Mode; Engineering Mode Overview - Matrix Fitness A7xE-04 Ascent Trainer Service Manual

cHAPtEr 6: EnginEEring ModE

6.1 EnginEEring ModE oVErViEw

The Engineering Mode allows the club owner to keep track of the technical settings and error history for the Ascent Trainer.
1) To enter Engineering Mode, press ENTER, 2, 0, 0, 1, ENTER on the lower keypad. Engineering Mode will appear on the display (Figure A).
2) Follow the prompts to change the desired setting.
3) Press the ENTER key once the desired setting is correct to save.
4) Press HOME to return to normal operation. note: If a setting has been changed, the unit and console power should be reset. Cycle the
power switch, and press and hold the CHANNEL UP and CHANNEL DOWN keys for 3-5 seconds to reset the console power.
figUrE A
16