Matrix Fitness A7xE-04 Ascent Trainer Service Manual page 56

9.2 front sHroUd rEPlAcEMEnt - continUEd
12) Remove the 9 screws to detach the front shrouds from the frame (or each other) (Figure M).
13) Turn the crank to the slotted portion of the shroud (Figure N).
figUrE M
14) Remove the front shrouds for frame access (Figures O & P).
figUrE o
15) Reverse Steps 1-14 to install new shrouds. note: The bolt / nut removed in Step 5 should be torqued to 70 N-m.
cHAPtEr 9: PArt rEPlAcEMEnt gUidE
figUrE n
figUrE P
53