8.8 troUblEsHooting - Error 0147
1) syMPtoM:
0147 – Incline Motor is disconnected for 3 seconds.
2) solUtion:
1) Check the incline motor wire connection at the LCB (Figure A).
2) Check to see if the incline value changes on the display when INCLINE UP or DOWN keys are pressed (Figure B).
- If there's no change, replace the incline motor.
- If there's a change, replace the LCB.
figUrE A
cHAPtEr 8: troUblEsHooting
Error codE 0147
figUrE b
35