Matrix Fitness A7xE-04 Ascent Trainer Service Manual page 59

cHAPtEr 9: PArt rEPlAcEMEnt gUidE
9.4 gEnErAtor rEPlAcEMEnt – continUEd
8) Remove the nut from the other side of the generator bracket (Figure E).
9) Loosen and remove the generator belt (Figure F).
figUrE E figUrE f
10) Remove the generator from the frame.
11) Reverse Steps 1-10 to install a new generator. Re-install the belts as outlined in Section 9.5. note: The 3 screws removed in Step 7
should be torqued to 8 N-m and the nut from Step 8 to 40 N-m.
12) Test the Ascent Trainer for function as outlined in Section 9.22.
56