Chapter 6: Engineering Mode; Using Engineering Mode - Matrix Fitness C5X-01 Service Manual

6.1 USING ENGINEERING MODE

To enter Engineering Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager Mode appears on the middle LED display.
Press the LEVEL UP or DOWN key to scroll to Engineering Mode. Press ENTER to go into Engineering Mode.
CODE
Disable Errors
Speed Units
Machine Type
Pause Time
Serial Number
Club ID
Sleep Time
E-Stop Switch
E-Stop Setting
12

CHAPTER 6: ENGINEERING MODE

DEFAULT
No
Mile
C5x
30 Seconds
N/A
N/A
Off
On
100
OPTIONS
Yes or No
Mile or Kilometer
C5x
15 - 120 Seconds
N/A
N/A
Off or On (1-30 Minutes)
Off or On
4-100
DESCRIPTION
No - Shows A-C class error
codes. Yes - Shows only C class
error codes.
Set for Mile or Kilometer.
This option selects the current
model.
For AC powered frames only.
This option controls the length of
a user's pause time before reset.
Serial Number input is available
for both the Console and Frame.
Use the number keys and UP
/ DOWN LEVEL keys to enter
Engineering Mode. Due to the
limited LED charactors, 2 layers
are used to enter the serial
number. First Layer:
- PPPPP V
- PPPPP is the product name
(CS17 for the Climb Mill).
- V is the version. If the
version is A, just leave this blank.
Second Layer
- YY MM nnnnn.
- YY is the year (11, 12).
- MM is the month (e.g. 08,
09, 10).
- nnnnn is the actual serial
number.
Use the UP / DOWN LEVEL keys
to navigate the layers and the
number keys to input the serial
number. The product name is
dependent on the Machne Type
setting.
For example, the console
is CS17 with ver. A and the
manufactured date is 2011.08
with 00123. The frame is CS17
with ver. A and the manufactured
date is 2011.07 with 99777. Their
serial numbers are:
Console SN: CS17 1rst layer,
110800123 2nd layer.
Frame SN: CS17 1rst layer,
110799777 2nd layer.
This sets the club ID for clubs
using Asset Management.
If there is no use of the machine
over a period of time, the console
LEDs will turn off (go into sleep
mode).
This option selects the E-Stop
function.
Adjusts the touched point of the
E-Stop.