Enable From Lcd; Use Pnp Feature; Figure 161: Gxv3240 Pnp Settings - Grandstream Networks GXV3240 User Manual

Enable from LCD

1. On the LCD screen, tap the icon
2. Tap the Setting icon
3. In the Settings page, switch the PNP feature on and switch the 3CX Auto Provision off. Type the URL
to the Configuration file path in the correct format. And if the GXV3240 needs to be set as a file server,
it needs to load the configuration file to the directory /Local Storage/pnp via the Import local
configuration file.
4. Save the setting and reboot the device.
Note: When PNP feature is enabled, a notification icon will be shown on LCD top status bar.

Use PNP Feature

After setting up the PNP feature on GXV3240, the other client phone units will multicast the SIP
SUBSCRIBE message while booting up if their 3CX Auto Provision feature has been enabled. Then the
client phone units configure server path and transportation protocol will be provisioned by the SIP NOTIFY
message from the GXV3240 device. After then the client phone units will download the config file from the
provisioned URI.
to enter the PNP application.
at the upper right corner of the screen to enter the PNP-Settings page.

Figure 161: GXV3240 PNP Settings

GXV3240 User Guide
P a g e | 135