Hold And Resume Conference; Auto Conference Mode; Missed Call; Figure 62: Missed Call Screen - Grandstream Networks GXV3240 User Manual

Hold and Resume Conference

During the conference, users could press the HOLD button
time.

Auto Conference Mode

The GXV3240 also supports "Auto Conference" which allows users to establish conference call in a quick
and easy way, instead of adding the other parties one by one. To enable Auto Conference feature, go to
web GUI->Advanced Settings->Call Features and set "Auto Conference" to "Yes". To esablish call with
auto conference when there are 1 or more calls on the GXV3240, simply press the conference button
and all the calls on GXV3240 will be brought into the conference.
Note:

During the conference, if the initiator of the conference hangs up, the conference will end. If users wish
to allow the remaining parties to stay in conversation after the initiator hangs up, the conference
initiator should set "Transfer on 3-way Conference Hang up" to "Yes" in web GUI->Account
page->Call Settings. This would allow the remaining parties to stay in the conference after the initiator
exists the conference.

Missed Call

When there is a missed call, the LCD will show missed call dialog on the idle screen.
Users can tap on the one of missed call entry to access the missed call log. To close the missed call
screen and return to the idle screen, tap
Note: Users may also disable the prompt for missed calls on web UI. Users may go to web UI -> Account ->
Call Settings -> Call Log, users need to choose "Don't Prompt Missed Call" to disable the prompt for
missed call logs.
to hold or resume the conference at any

Figure 62: Missed Call Screen

on the upper right.
GXV3240 User Guide
P a g e | 66