Figure 162: Gxv3240 Connect To Wi-Fi; Figure 163: Gxv3240 Connect To Wi-Fi-Show Advanced Options - Grandstream Networks GXV3240 User Manual

7. Once it's added and the password is remembered, the GXV3240 will connect to it again when the
SSID is within the range.
8. The previous steps allow the GXV3240 to connect the WiFi network with DHCP setting by default. If it
needs to connected the WiFi with static IP or PPPoE setting, please scroll down the setting window
and tap to check the "Show advanced options". Then the window will show up the IP settings at the
bottom. If Static IP is selected, the system will require end user to input IP address, Gateway, Network
prefix length and DNS 1 and DNS 2 addresses. If PPPoE is selected, the system will require end user
to input PPPoE account ID and password.

Figure 163: GXV3240 Connect to Wi-Fi-Show Advanced Options

9. If there is need to modify the saved Wi-Fi network setting, the end user should tap and long press the
SSID bar in the Wi-Fi setting page. The system will pop up a prompt and then user needs to tap the
"Modify Network". Then the phone system will pop up a new window to allow user to check the Wi-Fi
parameters and change the setting by checking the "Show advanced options" at the bottom.

Figure 162: GXV3240 Connect to Wi-Fi

GXV3240 User Guide
P a g e | 137