Ethernet Setup; Ethernet Standards; Typical Ethernet Systems - Keithley 2701 User Manual

Model 2701 User's Manual

Ethernet setup

Ethernet standards

The Model 2701 conforms to these standards:
•
•
•
•

Typical Ethernet systems

The four typical Ethernet systems using a Model 2701 are shown in Figures 10-1 through
10-4. The simplest system connects a Model 2701 directly to a PC equipped with a NIC
(Network Interface Card) as shown in
meters in length.
Figure 10-1
Direct 2701 connection to PC
PC with NIC installed
TCP/IP
HTTP
IEEE-802.3
SCPI 1996.0 (Standard Commands for Programmable Instruments)
Ethernet cross-over cable
Figure 10-1. The Ethernet cable can be up to 100
(RJ-45 male/male)
Up to 100 meters
Remote Operations
WARNING:
NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
10bT 100bT
CAT I MADE IN
U.S.A.
!
DIGITAL I/O TRIGGER ETHERNET RS-232
(EXT. TRIG.) LINK 10/100 BaseT
!
~LINE RATING
50, 60, 400Hz
SLT 28VA MAX
1
FUSE LINE
100V
250mAT 120V
220V
125mAT
240V
KEITHLEY
SLT
2
SLOT COVER ~LINE RATING
50, 60, 400Hz
28VA MAX
FUSE LINE
100V
250mAT
120V
CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING. 125mAT 220V
240V
Keithley 2701
10-7