Disk Drive Leds - HP StoreOnce 3100 Maintenance And Service Manual

Disk drive LEDs

Figure 9: Disk drive LEDs (in servers)
1.
2.
3.
4.
Drive locate LED
Disk activity ring LED
Do not remove LED
Drive status LED
Solid blue = The drive is being identified by a host
application.
Flashing blue = The drive carrier firmware is being updated
or requires an update.
Off = No drive activity
Rotating green = Drive activity
Solid white = Do not remove the drive. Removing the drive
causes one or more of the logical drives to fail.
Off = Removing the drive will not cause a logical drive to fail.
Off = The drive is not configured by a RAID controller.
Solid green = The drive is a member of one or more logical
drives.
Flashing green = The drive is rebuilding or performing a
RAID migration, stripe size migration, capacity expansion, or
logical drive extension.
Flashing amber/green = The drive is a member of one or
more logical drives and predicts the hard drive will fail.
Flashing amber = The drive is not configured and predicts
the hard drive will fail.
Solid amber = The drive has failed
Disk drive LEDs 27