Rbsu Settings - HP StoreOnce 3100 Maintenance And Service Manual

a. Log on to the iLO4 GUI.
b. Select the Administration Tab.
c. Select Licensing and enter the recorded license key in the section marked Enter License Activation
Key.
13. Use the StoreOnce GUI or StoreOnce CLI to check that the firmware on the new component is correct.
NOTE:
Note the output after running firmware upgrade. It will advise if you need a system reboot or a cold
reboot to install the new firmware revision successfully.
14. After power-up, it is necessary to rewrite warranty serial numbers into BIOS. Contact HPE Support for
assistance in rewriting warranty serial numbers.

RBSU settings

Table 14: RBSU settings for HPE StoreOnce 3100 System
Top menu item
Boot options
Power Management
Options
Advanced Options
Date and Time
BIOS Serial
Console and EMS
USB Options
Sub menu 1 Sub menu 2
Boot Mode
HP Power Profile
Advanced System Product ID
ROM Option
Thermal
configuration
Time (hh:mm:ss)
Time zone
BIOS Serial
Console Port
Embedded User
Partition
Current default Change to–
state
UEFI Mode Legacy BIOS mode
Balanced Power Maximum
and Performance performance
794750-B21
Optimal Cooling Increased cooling
As appropriate
UTC-07:00, As appropriate
Mountain Time (US
& Canada)
Auto Physical
Disabled Only if 'enabled' in
the first place
RBSU settings 49