Cad Drawing - ADJ Vizi BSW 300 User Instructions

Vizi BSW 300 Mounting Vizi BSW 300

CAD Drawing

NOTICE: The suitable enviromental temperature for this light-
ing fixture is between -25˚ C to 45˚ C. Do not place this lighting
221.2mm/8.70"
376.3mm/14.80"
fixture in an enviroment where the temperatures are under or
162.1mm/6.40"
119.9mm/4.70"
above the temperatures stated above. This will allow the fixture
to run at its best and help prolong the fixture life.
331.7mm/13"
Screw one clamp each via a M12 screw and nut into the
Omega holders. Insert the quick-lock fasteners of the Omega
126.6mm/5"
holder's into the respective holes on the bottom of the Vizi BSW
300. Tighten the quick-lock fasteners fully clockwise. Install the
second Omega holder. Pull the safety-cable through the open-
325.5mm/12.80"
370mm/14.55"
ings located on the base plate and over the trussing system or
a safe fixation spot. Insert the end in the carabine and tighten
the safety screw.
ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 8
ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 9