ADJ Vizi BSW 300 User Instructions page 16

Vizi BSW 300
2. Use the UP or DOWN buttons to highlight "Auto Test".
3. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Manual Test - With this function you can run a Manual Test.
1. Access the main menu, and press the UP or DOWN buttons so
that "Fixture Test" is highlighted, then press ENTER.
2. Use the UP or DOWN buttons to highlight "Manual Test". Press
ENTER to select and use the UP or DOWN buttons to change the
channel value.
3. Press the MENU button to return to the main menu.
FIXTURE INFORMATION -
Fixture Use Time - With this function, you can check the fixture run-
ning time.
1. Access the main menu, and press the UP or DOWN buttons so
that "Fixture Information" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Fixture Use Time" is dis-
played, and press ENTER. The fixture running time will now be dis-
played.
3. Press the MENU button to return to the main menu.
Firmware Version - With this function, you can check the current
firmware version.
1. Access the main menu, and press the UP or DOWN buttons so
that "Fixture Information" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Firmware Version" is dis-
played, and press ENTER. The current firmware version will now be
displayed.
3. Press the MENU button to return to the main menu.
RESET FUNCTION -
Pan & Tilt - With this function, you can reset the pan & tilt motors.
ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 30
System Menu Vizi BSW 300
1. Access the main menu, and press the UP or DOWN buttons so
that "Reset Function" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Pan & Tilt" is displayed, and
press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes".
To reset the pan & tilt motors, select "Yes" and press ENTER.
Effect - With this function, you can reset the effect motors.
1. Access the main menu, and press the UP or DOWN buttons so
that "Reset Function" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Effect" is displayed, and
press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes".
To reset the effects motors, select "Yes" and press ENTER.
All - With this function, you can reset all of the motors.
1. Access the main menu, and press the UP or DOWN buttons so
that "Reset Function" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "All" is displayed, and press
ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes".
To reset all of the motors, select "Yes" and press ENTER.
SPECIAL FUNCTIONS -
Special Functions - Within this menu, you can reset the fixture to the
original factory settings.
1. Access the main menu, and press the UP or DOWN buttons so
that "Special Functions" is highlighted, then press ENTER.
2. "Factory Setting" will now be displayed, and press ENTER.
3. To reset the fixture to factory settings, use the UP or DOWN but-
tons to "Yes" and press ENTER. If you do not wish to reset to fac-
tory settings, highlight "No" and press ENTER.
ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 31
System Menu