ADJ Vizi BSW 300 User Instructions page 14

Vizi BSW 300
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Sound Mode - In this menu you can activate sound active mode.
1. Access the main menu, and press the UP or DOWN buttons so
that "Show Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Sound Mode" is displayed,
and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "OFF" or "ON".
To activate sound active mode select "ON", to deactivate select
"OFF".
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Sound Sense - In this menu you can adjust the sound sensitivity.
1. Access the main menu, and press the UP or DOWN buttons so
that "Show Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Sound Sense" is displayed,
and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to adjust the sensitivity between
0-100. "0" being the least sensitive and 100 being the most sensitive.
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
FIXTURE SETTINGs -
Pan Invert - With this function, you can reverse the Pan movement.
1. Access the main menu, and press the UP or DOWN buttons so
that "Fixture Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Pan Invert" is displayed,
and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO".
Selecting "YES" will activate pan inverse, "NO" will deactivate the
function.
ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 26
System Menu Vizi BSW 300
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Tilt Invert - With this function, you can reverse the Tilt movement.
1. Access the main menu, and press the UP or DOWN buttons so
that "Fixture Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Tilt Invert" is displayed, and
press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO".
Selecting "YES" will activate tilt inverse, "NO" will deactivate the
function.
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
P/T Feedback - With this function, you have the pan and tilts postion
feedback while out of step or not feedback while out of step.
1. Access the main menu, and press the UP or DOWN buttons so
that "Fixture Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "P/T Feedback" is displayed,
and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO".
Selecting "YES" will activate feedback, "NO" will deactivate the func-
tion.
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Dimmer Mode - With this function, you can select your desired
dimmer curve. See the chart on page 37 for the different curves.
1. Access the main menu, and press the UP or DOWN buttons so
that "Fixture Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Dimmer Mode" is displayed,
and press ENTER. The current curve setting will now be displayed.
3. Use the UP or DOWN buttons to scroll through the different
ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 27
System Menu