ADJ Vizi BSW 300 User Instructions page 15

Vizi BSW 300
dimmer curves.
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
DISPLAY SETTINGS -
Display Invert - With this function, you can "flip" the display 180
degrees.
1. Access the main menu, and press the UP or DOWN buttons so
that "Display Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Display Invert" is displayed,
and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "No" or "Yes".
Selecting "Yes" will "flip" the display, "No" will return the display to
normal.
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Backlight Intensity - With this function, you can adjust the intensity
of the display backlight.
1. Access the main menu, and press the UP or DOWN buttons so
that "Display Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Backlight Intensity" is dis-
played, and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to to adjust the intensity between
1-10. 1 is the lowest intensity, 10 the brightest.
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Contrast Ratio - With this function, you can adjust the contrast ratio
of the display.
1. Access the main menu, and press the UP or DOWN buttons so
that "Display Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Contrast Ratio" is dis-
ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 28
System Menu Vizi BSW 300
played, and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to to adjust the intensity between
0-30. 0 is the lowest intensity, 30 the brightest.
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Temperature Unit - With this function, you can switch the tempera-
ture setting between Celsius or Fahrenheit.
1. Access the main menu, and press the UP or DOWN buttons so
that "Display Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Temperature Unit" is dis-
played, and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between °C or °F.
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
Display Warning - With this function, you can make the unit display
any service warnings or errors.
1. Access the main menu, and press the UP or DOWN buttons so
that "Display Setting" is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Display Warning" is dis-
played, and press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "NO" (normal
display) or "YES" (show service warnings in display).
4. Press ENTER to confirm your selection or press the MENU button
to return to the main menu.
FIXTURE TEST -
Auto Test - With this function, you can run an Auto Test.
1. Access the main menu, and press the UP or DOWN buttons so
that "Fixture Test" is highlighted, then press ENTER.
ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 29
System Menu