Rtmp - Cobalt Digital Inc 9223 Product Manual

The URL for accessing the bitstream will be:
http://encoder_ip:port/encoder1
http://encoder_ip:port/encoder2
Where
encoder_ip
the Network Tab) and
IP addresses of the 9223 is set to 10.10.9.80, and the Listening Port is set to 8000 (as shown
above), the URL for Encoder 1 will be:
Please note that none of the common web browsers (Explorer, Firefox, etc) are capable of
directly playing this URL; what these browsers will do is download the bitstream to a file. If you
wish to see video playback on a web page, please review the "Playing Video on a Web Page"
section later in this document.

RTMP

The 9223 can operate as an RTMP client, and publish a real-time, live bitstream to an RTMP
server. RTMP clients (such as the Adobe® Flash® Player) can connect to the server and play
the live stream. The 9223 can generally connect to the same servers as the Adobe Flash Live
Media Encoder (FMLE).
An RTMP server publishing point is defined by the following:
• An RTMP URL, of the form:
• A stream name
The first part of the URL defines the protocol, as follows:
• rtmp: standard RTMP with no security
• rtmpt: RTMP tunneled over HTTP
• rtmpe: encrypted RTMP using proprietary security
• rtmps: encrypted RTMP over SSL
• rtmpte: encrypted RTMP using proprietary security, tunneled over HTTP
• rtmpts: encrypted RTMP over SSL, tunneled over HTTP
The servername field is the host name or IP address of the RTMP server to be contacted. The
app field is the application in the server that should receive the data being transmitted. Note
that, depending on the service, the app field may contain a complete path or even a set of
parameters.
is the IP address of either one of the 9223 Ethernet ports (configured in
is the Listening Port configured above. For example, if one of the
port
http://10.10.9.80:8000/encoder1
rtmp[t][e][s]://servername/app
54
(access to encoder1)
or
(access to encoder2)
9223-OM (V2.5.0)