Table of Contents
Advertisement
web page for that output in the relevant Ethernet port. Note that the video will only actually play
if the network between the client and the encoder supports multicast. This will typically be the
case if the encoder and the client are in the same subnetwork, but may not work across routers
unless they have multicast support enabled, and will definitely not work across the Internet.
The relevant pages are shown below. Both UDP and RTP are supported.
If you configure an MPTS stream (i.e., both encoders routed to the same IP Output), the page
will be available for both encoders, but the plugin will only play the first channel (Encoder 1).
Also, the plugin will only play the first audio PID, even if secondary audio is configured.
HTTP Live Streaming
All the web pages accessible from the Ethernet ports of the 9223 include a link for the built-in
HTTP Live Streaming server page.
If the IP address of the port being accessed is xxx.xxx.xxx.xxx, the available local HLS
channels can also be accessed through this direct link:
104
9223-OM (V2.5.0)
Advertisement
Table of Contents
