• Dual Channel encoders with combined audio: support for up to 4 audio stereo pairs per
board, as follows:
o First stereo pair:
o Second stereo pair:
o Third stereo pair (only available for SDI inputs):
o Fourth stereo pair (only available for SDI inputs):
Encoder Basic Configuration Tab
The Encoder Basic Configuration Tab, shown below, is divided into three general areas:
• General Configuration: generic configuration parameters.
• Video Configuration: parameters related to video encoding.
• Audio Configuration: parameters related to audio encoding.
Third stereo pair (only available for SDI inputs):
• MPEG-1 Layer II support only
• Valid input: SDI embedded
MPEG-1 Layer II, AAC-LC or Dolby Passthrough support
Valid inputs: analog audio, SDI embedded (SDI signals only)
MPEG-1 Layer II, AAC-LC or Dolby Passthrough support
Valid inputs: second analog audio, SDI embedded (SDI signals only)
MPEG-1 Layer II support only
Valid input: SDI embedded
MPEG-1 Layer II support only
Valid input: SDI embedded
23
9223-OM (V2.5.0)