Basic Tab - Secondary Audio Support - Cobalt Digital Inc 9223 Product Manual

Dual-channel 3g/hd/sd mpeg-4 encoder
Table of Contents

Advertisement

The second additional audio option will be offered in the following conditions:
• In a single-channel encoder, if the input signal type is SDI.
• In a dual-channel encoder, if the first additional audio is not being used by the other
encoder channel.
• In a dual-channel encoder, if secondary audio is enabled (see the next section).
Additional audio channels are only available if the Output Protocol in the Encoder Connections
Tab is set to ASI/IP Streaming.
Basic Tab – Secondary Audio Support
A dual-channel 9223 can be configured to offer secondary audio support (i.e., a second audio
PID in the same program). If this function is available, it will be available in the audio section of
Encoder 1, as indicated below:
Secondary audio support is only available if the Output Protocol in the Encoder Connections Tab
is set to ASI/IP Streaming.
33
9223-OM (V2.5.0)

Advertisement

Table of Contents
loading

Table of Contents