Table of Contents
Advertisement
Important Regulatory and Safety Notices
Before using this product and any associated equipment, refer to the "Important Safety
Instructions" listed below to avoid personnel injury and to prevent product damage.
Products may require specific equipment, and/or installation procedures to be carried out to
satisfy certain regulatory compliance requirements. Notices have been included in this
publication to call attention to these specific requirements.
Symbol Meanings
This symbol on the equipment refers you to important operating and maintenance
(servicing) instructions within the Product Manual Documentation. Failure to heed this
information may present a major risk of damage or injury to persons or equipment.
Warning
indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Caution
indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices.
Notice
— The symbol with the word "Notice" within the equipment manual indicates a
situation, which if not avoided, may result in major or minor equipment damage or a
situation which could place the equipment in a non-compliant operating state.
ESD Susceptibility
electronic device or assembly is susceptible to damage from an ESD event.
Important Safety Instructions
Caution
frame. Refer to the frame User Manual for important safety instructions regarding the
proper installation and safe operation of the frame as well as its component products.
Warning
a safety hazard, with the power switch in the OFF position. To avoid electrical shock,
disconnect all A/C power cards from the chassis' rear appliance connectors before
servicing this area.
— The symbol with the word "Warning" within the equipment manual
— The symbol with the word "Caution" within the equipment manual
— This symbol is used to alert the user that an electrical or
— This product is intended to be a component product of an 8300 series
— Certain parts of this equipment namely the power supply area still present
3
9223-OM (V2.5.0)
Advertisement
Table of Contents
