Appendix A Rj-45 Connector Description - Planet WSG-401 User Manual

Appendix A RJ-45 Connector Description

RJ-45 Ethernet Port
The WSG-401 RJ-45 Ethernet port can connect to any networking devices that use a standard LAN
interface, such as a Hub/Switch Hub or Router. Use unshielded twisted-pair (UTP) or shield twisted-pair
(STP) cable to connect the networking device to the RJ-45 Ethernet port.
Depending on the type of connection, 10Mbps or 100Mbps, use the following Ethernet cable, as
prescribed.
10Mbps: Use EIA/TIA-568-100-Category 3, 4 or 5 cable.
100Mbps: Use EIA/TIA-568-100-Category 5 cable.
Figure A-1 RJ-45 Connector and Cable Pins
Note:
F To prevent loss of signal, make sure that the length of any twisted-pair connection does not exceed
100 meters.
WSG-401 User Manual
131