Table of Contents
Advertisement
Administrator Idle-Timeout 5 Minutes
Item
DHCP Server
DHCP Relay
DHCP Server IP Address
DHCP Server
DHCP Pool Starting
Address
DHCP Pool Size
Lease Time
Primary DNS Server
Secondary DNS Server
Email Server Redirect
IP Address or Domain
Name
SMTP Port
48
The idle time out valid range is 1-1440. If the idle time
out is set as 5 minutes, it means if the administrator
doesn't send packet in 5 minutes, the administrator will
logout automatically.
Default
There are three types of DHCP Services.
DHCP Disable—Disable the DHCP server function.
Enable
DHCP Relay—Enable DHCP Relay function.
DHCP Server—Enable DHCP server function.
To route DHCP through an external server, the administrator needs
to enable the DHCP relay and assign a valid DHCP server IP
address.
Empty
Enter the IP address of DHCP server.
The WSG-401's DHCP server is turned on and running by default
when you install it in your network.
192.168.0.2 Enter the DHCP Pool Starting IP address.
253
The DHCP pool size range is 1 to 512.
300
Enter the DHCP lease time. The DHCP lease time range
Minutes
is 1 to 71582788 minutes.
Enter the IP address of the network's primary DNS
168.95.1.1
server.
Empty
Enter the IP address of a second DNS server on the
network.
To prevent some subscriber's original Email server may protect by
firewall or NAT network. WSG-401 provides an extra Email server
parameter to forward the subscriber's Email. The WSG-401 not only
forwards the subscribers' E-mail via other E-mail server but also
changes the SMTP header. The recipient of your E-mail sees the
message as if you sent it from your local Internet Service Provide, not
form the hotel or other place. Note: Before setting this sever, please
make sure the e-mail sever relay function is opened. It must not
exceed 50 characters.
Empty
Enter the E-mail server IP address or domain name.
25
Enter the SMTP port number for mail server. The SMTP
Description
WSG-401 User Manual
Advertisement
Table of Contents
