Getting Start - Planet WSG-401 User Manual

Fixed IP
l Your fixed IP address for the WSG-401
l Your subnet mask for the WSG-401
l Your default gateway IP address
l Your DNS IP address
PPPoE
l Your user name from your ISP
l Your password from your ISP
PPTP
l PPTP Server IP Address from your ISP
l PPTP Local IP address from your ISP.
l PPTP Local IP subnet mask from your ISP.
l Your user name from your ISP
l Your password from your ISP
Your PC Requirements
The Static IP settings for the PC
l Your PC's fixed IP address
l Your PC's subnet mask
l Your PC's default gateway IP address
l Your PC's primary DNS IP address
Note:
1. The gateway's default IP address setting is "192.168.0.1".
2. The gateway's default subnet mask setting is "255.0.0.0".
The Dynamic IP settings for the PC
We recommend that you leave your IP settings as automatically assigned. By default, WSG-401 is a
DHCP server, and it will give your PC the necessary IP settings.
2.4

Getting Start

1. Place the WSG-401 and Mini account generator printer on a flat work surface.
2. Connect the DB25 connector of printer cable into the device port on the rear of the WSG-401.
3. Plug the other end of the printer cable into the RJ11 port of the mini account generator printer. Check
that the account generator printer status LED lights.
4. Ensure that your modem and computer are both switched on.
5. Use the supplied cable to connect
Cable/xDSL Status LED lights.
6. Connect your computer to one of the 10/100 LAN ports on
14
the WSG-401's WAN port to the modem. Check that the
the WSG-401. Check that the LAN Port
WSG-401 User Manual