Planet WSG-401 User Manual page 41

Item
DNS Fake IP Reply
Layer 2 Isolation Security
Secure administrator IP
Addresses
Multicast Pass Through
Allow remote user to ping the
device
SSL Certificate
Click Apply button to save the new settings.
Click Apply button, then Restart dialog box will appear. Click Apply to restart the system.
WSG-401 User Manual
Default
While Internet servers on your LAN such as proxy
server and SMTP server require IP addresses, it is
often not necessary to assign real IP addresses to
Enable each end-user workstation on a LAN. NAT is the
process of assigning fake IP addresses to network
devices, then translating them into a real IP address
for Internet communication.
If plug and play Internet access is selected, you can
enable Layer 2 Isolation Security function. When the
Enable
"Layer 2 Isolation Security" enabled, everyone cannot
communicate with each other.
Options: Any and Specify. User can specify 5 IP
Any addresses or a range to allow remote control access
from network.
This function allows for multiple transmissions to
Disable
specific recipients at same time.
This function allows remote user to ping the
WSG-401 through Internet. Ping is normally used to
Enable
test the physical connection between two devices, to
ensure that everything is working correctly.
Option: default or customize certificate, These are
two ways to create a certificate, one is purchase a
Default certificate from a certificate authority (Ex. Verisign or
Thawte), and another is creating a self-certificate (For
example: Uses OpenSSL tool).
Figure 3-24 Restart Dialog Box
Description
41