Installation; Wall-Mounting; Connecting The Antennas - Planet WSG-401 User Manual

2. Installation

Following sessions are physical installation steps of WSG-401. Please refer to the illustration and follow
the steps below to complete the installation of your device.
2.1

Wall-Mounting

The WSG-401 can be wall-mounted on a wall by applying the two mounting brackets on screws.
Figure 2-1 Wall-Mounting Bracket - Bottom of WSG-401
Please refer to the following instructions for mounting a WSG-401 on a wall or other surface.
1. Install two screws on a wall according to the relative positions shown below.
Figure 2-2
2. Hang WSG-401 on the wall by sliding the two screws in the mounting brackets.
Note: If the screws are not properly anchored, the strain of the cables connected to the WSG-401 rear
panel connectors could pull out the WSG-401 from the wall.

2.2 Connecting the Antennas

PLANET WSG-401 provides two antenna connectors on the rear of the unit for wireless subscribers.
WSG-401 User Manual
12