Table of Contents
Advertisement
Item
My IP Address
My Subnet Mask
Gateway IP Address
PPTP Server IP Address Empty
Username
Password
PPP MTU Setting
TCP MSS Setting
Connection ID/Name
Connect on Demand and Max Idle Time
Connect on Demand
Max Idle Time
46
Default
Empty
A PPTP local IP address for the xDSL/Cable
connection (provided by your ISP).
Empty
A PPTP local IP address for the xDSL/Cable
connection (provided by your ISP).
Empty
A PPTP local default gateway for the xDSL/Cable
connection (provided by your ISP).
A PPTP server IP address for the xDSL/Cable
connection (provided by your ISP).
Empty
Enter your PPTP account name. The user name can
consist of up to 80 alphanumeric characters and is
case sensitive.
Empty
Enter your PPTP password. The password can
consist of up to 80 alphanumeric characters and is
case sensitive.
1460
MTU (Maximum Transfer Unit) specifies maximum
transmission unit size.
1400
MSS (Maximum Segment Size) specifies maximum
segment size.
Empty
Connection ID or connection name.
Enable
You can configure your WSG-401 to cut your
connection with your ISP after a specified period of
10 Minutes
time (Max Idle Time). If you have been disconnected
due to inactivity, Connect on Demand enables your
WSG-401
connection as soon as you attempt to access the
Internet again. If you wish to activate Connect on
Demand, click the check box. If you want your
Internet connection to remain, click the check box of
keep alive. The Max Idle Time maximum value is
65535 minutes.
Description
to
automatically
re-establish
your
WSG-401 User Manual
Advertisement
Table of Contents
