2.5.8 I ndex detector A set
Disassembly procedure
1) Remove the main board set. (Refer to 2.5.1 )
2) Remove the index detector A set fixing screw.
(Fig. 3-23)
CP:
M2.5 x 4 x 1
3) Remove the sub-frame unit (Refer to 2.5.3)
4) Remove the front panel. (Refer to 2.5.4)
5) Remove the disk guide (L) unit. (Refer to 2.5.5)
6) Remove the write protect detector. (Refer to
2.5.5)
7) Desolder the cable of the index detector A set
from the write protect detector board.
Notes on disassembly
Index detector A
Fig. 2-46
2-28