Epson QX-10 Technical Manual page 40

Disassembly procedure
Notes on disassembly
I
t--
Lubricate
~ L~ch
1) Lubricate the latch receiver of the disk guide (L).
)
Fig. 2-35
2)
Lubricate the part making contact between the sa-
I
fety lever add disk guide (L).
Disk guide (L)
Lubricate
Safety
Fig. 2-36
3) Lubricate the eject transmission lever bearing of
the disk guide (L).
Eject transmission lever
Fig. 2-37
4) Push the pushbutton into the disk guide (L).
2-22
Lubricate