Table of Contents
Advertisement
Chapter 1
Setting Up Your System
This chapter describes the basic steps you perform to
set up your system for the first time. It defines the system
requirements and gives a general outline of the steps you need
to follow to start using your computer. It also describes how to
set the appropriate country code for the system's keyboard and
configuration information.
Preparing to Set Up the System
Before you set up your system, be sure to read "Important
Safety Instructions" at the beginning of this manual (before the
table of contents). These instructions provide information about
properly caring for your computer and operating it correctly.
It is important to choose a safe, convenient location for your
system that provides the following:
A flat, hard surface. Surfaces like carpeted floors attract
static electricity, which can erase data on your disks,
damage the computer's circuitry, and prevent proper
ventilation. Place the computer on an anti-static mat if the
surface is carpeted.
Good air circulation. Leave several inches of space around
the computer so air can move freely.
Moderate environmental conditions. Select a cool, dry area
and protect your computer from extremes in temperature,
humidity, dust, and smoke. Avoid direct sunlight or any
other source of heat.
Setting Up Your System
Z-1
Advertisement
Table of Contents
