Table of Contents
Advertisement
2.5.4 Front panel
Disassembly procedure
1) Remove the main board set. (Refer to 2.5.1 )
2) Remove the front panel fixing screws, and take off
the front panel by pulling it to the front.
es
M2.5 x 4 x 2
Lead wire clamp
Notes on disassembly
• The front panel should be taken off taking care that
it not caught by the lead wire of index detecto.r B
located under the front panel lead wire clamp.
Fig. 2-33
1) Set the front panel, and hook the lead wire of index
detector 8 on the front panel lead wire clamp.
2) Fix the front panel to the main unit with the front
panel fixing screws.
(Screw tightening torque: 4.0 kg-cm)
3) Mount the main board set. (Refer to 2.5.1 )
2-20
•
Insert the lead wire of the index detector B inside
the claws (2) of the lead wire clamp.
(Refer to Fig. 2-33)
Advertisement
Chapters
Table of Contents
