Table of Contents
Advertisement
A
Enabling Hyper-Threading Technology
Appendix A - Enabling Hyper-Threading Technology
A.1 Enabling Hyper-Threading Technology
To enable the functionality of the Hyper-Threading Technology, please
follow the requirements and steps below. Basically, the following
presumes that you have already installed an Intel
Processor with Hyper-Threading Technology.
1. The system requires a minimum of 300 Watt ATX 12V power
2. Aside from installing a CPU fan on the Intel
3. The "CPU Hyper-Threading" field in the Advanced BIOS Features
4. Currently, only Windows
5. After installing Windows
106
supply.
Processor with Hyper-Threading Technology, make sure to install
additional cooling fans. The system requires adequate airflow
throughout the chassis to prevent overheating the processor.
submenu of the Award BIOS setup will appear. Make sure this
field is set to Enabled.
Technology. If this OS has been previously installed, you must
REINSTALL it again.
ensure that the operating system has been properly installed.
a.
Click Start, point to Settings then click Control Panel.
b.
Double-click the System icon. The System Properties dialog
box will appear.
®
XP supports the Hyper-Threading
®
XP, please check the following to
®
®
Pentium
4
®
®
Pentium
4
Advertisement
Table of Contents
