Table of Contents
Advertisement
3
Award BIOS Setup Utility
3.1.2.12 Typematic Rate Setting
Disabled Continually holding down a key on your keyboard
Enabled The BIOS will not only report that the key is down,
3.1.2.13 Typematic Rate (Chars/Sec)
This field allows you to select the rate at which the keys are
accelerated.
3.1.2.14 Typematic Delay (Msec)
This field allows you to select the delay between when the key
was first depressed and when the acceleration begins.
3.1.2.15 Security Option
This field determines when the system will prompt for the pass-
word - everytime the system boots or only when you enter the
BIOS setup. Set the password in the Set Supervisor/User Pass-
word submenu.
System The system will not boot and access to Setup will be
Setup
3.1.2.16 APIC Mode
Leave this field in its default setting.
62
will cause the BIOS to report that the key is down.
but will first wait for a moment, and, if the key is still
down, it will begin to report that the key has been
depressed repeatedly. For example, you would use
such a feature to accelerate cursor movements with
the arrow keys. You can then select the typematic
rate and typematic delay in the "Typematic Rate
(Chars/Sec)" and "Typematic Delay (Msec)" fields
below.
denied unless the correct password is entered at the
prompt.
The system will boot, but access to Setup will be de-
nied unless the correct password is entered at the
prompt.
Advertisement
Table of Contents
