Appendix A - Enabling The Hyper-Threading Technology; Enabling The Hyper-Threading Technology - DFI LANPARTY UT 915P-T12 User Manual

Appendix A - Enabling Hyper-Threading Technology
A.1 Enabling Hyper-Threading Technology
To enable the functionality of the Hyper-Threading Technology, please
follow the requirements and steps below. Basically, the following
presumes that you have already installed an Intel
Processor with Hyper-Threading Technology.
1. The system requires a minimum of 300 Watt ATX 12V power
supply.
2. Aside from installing a CPU fan on the Intel
Processor with Hyper-Threading Technology, make sure to install
cooling fans. The system requires adequate airflow throughout the
chassis to prevent overheating the processor.
3. The "CPU Hyper-Threading" field in the Advanced BIOS Features
submenu of the Award BIOS setup will appear. Make sure this
field is set to Enabled.
4. Currently, only Windows
Technology. If this OS has been previously installed, you must
REINSTALL it.
5. After installing Windows
ensure that the operating system has been properly installed.
a. Click Start, point to Settings then click Control Panel.
b. Double-click the System icon. The System Properties dialog
box will appear.
Enabling Hyper-Threading Technology
®
XP supports the Hyper-Threading
®
XP, please check the following to
® ®
Pentium 4
® ®
Pentium 4
A
115