Table of Contents
Advertisement
2
Hardware Installation
2.6.3 S/PDIF-out Connector
1
5
VCC
N. C.
VCC
Ground
SPDIF-out
One card-edge bracket, mounted with a S/PDIF port, will be pro-
vided as an option. Install the card-edge bracket to the system
chassis then connect the audio cable connector to J5. Make sure pin
1 of the cable connector is aligned with pin 1 of J5. Now connect
external speakers or a device that supports digital output to the
S/PDIF port that is on the bracket.
37
Advertisement
Table of Contents
