Table of Contents
Advertisement
3
Award BIOS Setup Utility
3.1.5.3 Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA
BIOS when it wakes up from the S3 state.
3.1.5.4 USB KB Wake-Up From S3
Set this field to Enabled to use the Wake-On-USB Keyboard func-
tion. This function allows you to use a USB keyboard to wake up
a system from the S3 (STR - Suspend To RAM) state.
3.1.5.5 Power Management
This field allows you to select the type (or degree) of power
saving by changing the length of idle time that elapses before the
Suspend mode and HDD Power Down fields are activated.
Min Saving
Max Saving
User Define
3.1.5.6 Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to
Blank Screen
DPMS
3.1.5.7 Video Off In Suspend
This field is used to activate the video off feature when the sys-
tem enters the Suspend mode.
76
Minimum power saving time for the Suspend
Mode (1 hour) and HDD Power Down (15 min.)
Maximum power saving time for the. Suspend
Mode and HDD Power Down = 1 min.
Allows you to set the power saving time in the
"Suspend Mode" and "HDD Power Down"
fields.
turn off the vertical and horizontal syn-
chronization ports and write blanks to the
video buffer.
This option only writes blanks to the video
buffer.
Initializes display power management signaling.
Use this option if your video board supports it.
Advertisement
Table of Contents
