Danfoss vlt fcd 302 Operating Instructions Manual page 68

Troubleshooting
N N o. Description
82 CSIV parameter error
85 Profibus/Profisafe Error
90 Feedback Monitor
91 Analogue input 54 wrong settings
250 New spare part
251 New Type Code
Table 7.1 Alarm/Warning Code List
(X) Dependent on parameter
1) Can not be Auto reset via 14-20 Reset Mode
A trip is the action when an alarm has appeared. The trip will coast the motor and can be reset by pressing the reset button or
make a reset by a digital input (par. group 5-1* [1]). The origin event that caused an alarm cannot damage the frequency
converter or cause dangerous conditions. A trip lock is an action when an alarm occurs, which may cause damage to frequency
converter or connected parts. A Trip Lock situation can only be reset by a power cycling.
Warning
Alarm
Trip locked
inverter.ru (812) 702-47-50
VLT Decentral Drive FCD 302 Operating Instructions
Warning
(X)
LED Indication
yellow
flashing red
yellow and red
MG.04.F2.02 - VLT is a registered Danfoss trademark
Alarm/Trip Alarm/Trip Lock
X
X
(X)
X
X
X X
Parameter Reference
17-61 Feedback Signal Monitoring
S202
14-23 Typecode Setting
7 7
65