D-Link DGS-1510 Series Reference Manual page 376

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# show lldp management-address
Address 1 : (default)
------------------------------------------------
Subtype
Address
IF Type
OID
Advertising Ports
Address 2 :
------------------------------------------------
Subtype
Address
IF Type
OID
Advertising Ports
Total Entries : 2
Switch#
43-24 show lldp neighbor interface
This command is used to display each physical interface's information currently learned from the
neighbor.
show lldp neighbors interface INTERFACE-ID [, | -] [brief | detail]
Parameters
INTERFACE-ID
,
-
brief
detail
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command display the information learned from the neighbor devices.
: IPv4
: 10.90.90.90
: IfIndex
: 1.3.6.1.4.1.171.10.118.2
: -
: IPv4
: 10.90.90.90
: IfIndex
: 1.3.6.1.4.1.171.10.118.2
: -
Specifies the interface ID.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
(Optional) Specifies a range of interfaces. No spaces before and
after the hyphen.
(Optional) Specifies to display the information in brief mode.
(Optional) Specifies to display the information in detailed mode. If
neither brief nor detail is specified, display the information in normal
mode.
373