Driver Information System - Seat LEON Owner's Manual

are preheating. When the warning lamp goes
off, the engine should be started straight
away.
Control lamp  flashes
If a fault develops in the engine management
system while you are driving, the glow plug
system lamp will flash . Take the vehicle to
a specialised workshop as soon as possible
and have the engine checked.
72
Operation

Driver information system

Information system
Introduction
With the ignition switched on, it is possible
to read the different functions of the display
by scrolling through the menus.
In vehicles with multifunction steering wheel,
the multifunction display can only be operat-
ed with the steering wheel buttons.
The number of menus displayed on the in-
strument panel will vary according to the ve-
hicle electronics and equipment.
A specialised workshop will be able to pro-
gramme or modify additional functions, ac-
cording to the vehicle equipment. SEAT rec-
ommends visiting a SEAT Official Service.
Some menu options can only be read when
the vehicle is at a standstill.
As long as a priority 1 warning is displayed, it
will not be possible to read the menus. Some
warning messages can be confirmed and
made to disappear with the windscreen wiper
lever button or the multifunction steering
wheel button.
The information system also provides the fol-
lowing information and displays (depending
on the vehicle's equipment):
›››
Driving data page 76
Vehicle status
■
■ MFD from departure
MFD from refuelling
■
■ MFD total calculation
›››
Assist systems table on page 74
■ Activate/deactivate Lane Assist
Reverse (optional)
■
›››
Navigation Booklet Navigation system
››› ›››
Audio Booklet Radio or Booklet Naviga-
tion system
››› ›››
Telephone Booklet Radio or
let Navigation system
›››
Vehicle table on page 74
WARNING
Any distraction may lead to an accident, with
the risk of injury.
● Do not operate the instrument panel con-
trols when driving.
Book-