Seat LEON Owner's Manual page 141

Hide thumbs Also See for LEON:
Table of Contents

Advertisement

Applying both the inertia mode (= prolonged
section with less energy) and the switching
off using inertia (= shorter section without
the need for fuel) facilitates improved fuel
consumption and emission balance.
WARNING
If the inertia mode has been switched on,
take into account, when approaching an ob-
stacle and releasing the accelerator pedal,
that the vehicle will not decelerate in the usu-
al manner: risk of accident!
When using inertia mode while travelling
down hills, the vehicle can increase speed:
risk of accident!
If other users drive your vehicle, warn them
about inertia mode.
Note
Inertia mode is only available in
Drive Profile*) driving mode.
The driver message
is only displayed
Inertia
with the current consumption. In inertia
mode the gear will no longer be displayed
(for example "E" will appear instead of "E7").
On downhill sections with gradients above
15 %, the inertia mode will automatically be
switched off temporarily.
Backup programme
A backup programme is in place if a fault
should occur in the control system.
If all the positions of the selector lever are
shown over a light background on the instru-
ment panel display, there is a system fault
and the automatic gearbox will operate in
with the backup programme. When the back-
up programme is activated, it is possible to
drive the vehicle, however, at low speeds and
within a selected range of gears. In some ca-
ses driving in reverse gear may not be possi-
ble.
CAUTION
If the gearbox operates with the backup pro-
gramme, take the vehicle to a specialised
workshop and have the fault repaired without
delay.
(SEAT
eco
Clutch
Clutch overheating! Please stop!
The clutch has overheated and could be dam-
aged. Stop the vehicle and wait for the gear-
box to cool with the engine at idling speed
and the selector lever in position P. When the
warning lamp and the driver message switch
off, have the fault corrected by a specialised
workshop without delay. If the warning lamp
and the driver message do not switch off, do
Driving
not continue driving. Seek specialist assis-
tance.
There is a fault in the gearbox. Stop the vehi-
cle in a safe place and do not continue driv-
ing. Seek specialist assistance.
Have the fault corrected by a specialised
workshop without delay.
Take the vehicle to a specialised workshop
and have the fault repaired without delay.
Stop the vehicle in a safe place well away
from moving traffic. Seek specialist assis-
tance.
Continue driving at moderate speeds. When
the warning lamp switches off, you can con-
tinue driving in a normal manner.
Faults in the gearbox
Gearbox: Fault! Stop the vehicle and place
the lever in the position P.
 Gearbox: System fault! You may continue
driving.
 Gearbox: System fault! You can continue
driving with restrictions. Reverse gear disa-
bled
 Gearbox: System fault! You can continue
driving in D until switching off the engine
 Gearbox: too hot. Adapt your driving ac-
cordingly
»
139

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents