Cruise control
Cruise control system operation
(CCS)*
See Fig. 3 for positioning
Fig. 32
See Fig. 3 for positioning
Fig. 33
The essentials
Operation of the turn signal lever
Switching on the CCS: Move switch
●
›››
Fig. 32
to . The system is on. If no
1
speed has been programmed, the system will
not control it.
●
Activating the CCS: Press button
in the area. The current speed is
2
memorised and controlled.
●
Temporarily switching off the CCS: Move
›››
switch
Fig. 32
to or push the
1
brake. The cruise control system is switched
off temporarily.
Reactivating the CCS: Press button
●
›››
Fig. 32
in . The memorised speed
2
is saved and controlled again.
●
Increasing stored speed during CCS regula-
tion: press button
in . The vehicle ac-
2
celerates until the new stored speed.
●
Reducing stored speed during CCS regula-
tion: press button
in to lower the
2
speed by 1 km/h (1 mph). Speed is reduced
until reaching the new stored speed.
●
Switching off the CCS: Move switch
›››
Fig. 32
to . The system is disconnec-
1
ted and the memorised speed is deleted.
Operation using the third lever
Switching on the CCS: move the third lever
●
›››
to
Fig.
33. The system switches on but it
does not control the speed as no speed has
been programmed.
›››
Fig. 32
●
Activating the CCS: press the
button. It memorises and maintains the cur-
rent speed.
●
Temporarily switching off the CCS: move
the lever to
press the brake pedal. The cruise control sys-
tem is switched off temporarily.
Reactivating the CCS: move the lever to
●
›››
Fig. 33
rised speed is saved and controlled again.
●
Switching off the CCS: move the third lever
›››
Fig. 33
to position
connected and the memorised speed is de-
leted.
›››
›››
page 150
›››
Fig. 33
›››
Fig. 33
and release it or
and release it. The memo-
to . The system is dis-
in How it works on page 150
21