Display Brightness - Miele FN 3x402 i AU Operating And Installation Instructions

 By touching the  or  sensor you
can now select:
0: keypad tone off; door alarm off
1: keypad tone off; door alarm on
(after 4 minutes)
2: keypad tone off; door alarm on
(after 2 minutes)
3: keypad tone on; door alarm on
(after 2 minutes)
 Touch the OK sensor to confirm your
selection.
The selected setting is saved and the
 symbol flashes.
 Touch the settings sensor to leave
settings mode.
Otherwise, the electronics will leave
settings mode automatically after
approx. one minute.
Display brightness 
You can adjust the display brightness to
suit the light conditions in the room.
The display brightness can be adjusted
in steps from 1 to 3. The factory default
setting is 3 (maximum brightness).
Changing the display brightness
 Touch the settings sensor.
All selectable symbols appear in the
display and the  flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol appears in the display.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes in the
display and the  symbol lights up.
Further settings
27