Installing the appliance
Push the loose-fitting fixing bracket
against the side wall.
Screw the fixing bracket to the
housing unit side wall with the
screw . Pre-drill the hole in the
housing unit if necessary.
Secure the fixing bracket to the
housing unit side walls using the
screws . Drill holes in the housing
unit side walls if necessary.
Important: Push the protruding
bracket using your thumb towards
the housing unit wall whilst tightening
the screws. The appliance must not
pull back into the unit.
Then tighten the screws and .
72
Break off the ends of the brackets
and dispose of them. They are no
longer needed.
Attach the respective covers and
to the fixing brackets.