Table of Contents
Advertisement
If the all round gap of 42 mm is not
maintained between the appliance
casing and the front edge of the
housing unit side wall, the door may
not shut properly.
This can cause ice to build up,
condensate to accumulate and lead
to faults in the appliance. These can
all lead to increased energy
consumption.
Installing the appliance
Securing the appliance in the
niche
Press the appliance against the side
of the housing unit on the hinge side.
Screw chipboard screws through
the hinge plates at the top and
bottom and then the middle to secure
the appliance to the housing unit.
71
Advertisement
Table of Contents
