Selecting further settings
Changing the volume of the alarms
and buzzers /
You can change the volume of the
alarms and buzzers (e.g. in the event of
a door alarm or a fault message).
Alternatively, you can switch the alarms
and buzzers off if you find them
annoying.
In Settings mode , use the or
sensor to scroll to the symbol.
Touch OK.
Use the and sensors to select
the volume you want for alarms and
buzzers.
Touch OK.
When the alarms and buzzers are
switched off, will appear.
Adjusting the display brightness
You can adjust the display brightness to
the lighting conditions in the room.
In Settings mode , use the or
sensor to scroll to the symbol.
Touch OK.
Use the and sensors to select
the display brightness you want.
Touch OK.
44
Switching off Demo mode
Demo mode allows the refrigeration
appliance to be presented in the
showroom without the cooling system
being switched on. Do not activate this
setting for domestic use.
If Demo mode has been switched on
as a default setting, will appear in
the display when the refrigeration
appliance is switched on.
Touch the OK sensor on the control
panel.
Miele
will appear initially in the display,
followed by the start screen.
Touch OK.
In Settings mode , use the or
sensor to scroll to the symbol.
Touch OK.
After Demo mode has been switched
off, the refrigeration appliance shuts
down and must be switched on again.