Preparing the appliance
Position the appliance in front of the
housing unit.
Slide the cover strip into the
holders as shown.
Installing the appliance
Screw the fixing bracket using the
hexagonal screw to the pre-drilled
holes in the appliance door. Using the
pre-drilled holes in the appliance
door, secure a second pair of fixing
brackets in the handle area of the
door.
Push the appliance two-thirds of the
way into its niche. When doing this,
make sure that the mains cable does
not get trapped.
Useful tip: To help you push it into
position, tie a piece of string around the
plug to "increase" the length of the
connection cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the
appliance is in the unit.
67