Installing the appliance
Drill fixing holes in the furniture
door and screw in the screws .
Make sure the two metal edges are
aligned (Symbol //).
Close the appliance door and the
furniture door.
Adjusting the depth (Z)
Loosen the screws at the top of
the appliance door and the screw
on the lower fixing bracket. Move the
furniture door to create a gap of
2 mm between the furniture door and
the housing unit.
78
Tighten all screws again.
Fit the top cover , and click it into
place.
Fit the side covers , making sure
they click into place.